A solid roof, one that protects a home for decades, is the product of careful and precise installation, not a result of luck. A complete roof is made of many carefully placed layers, each serving a specific purpose and working together as a system. Many homeowners make the mistake of assuming the shingles (or roof covering) are what makes their roof their roof. While shingles are a core component of a complete roof, many other layers and materials make it whole. Some of these layers provide support, others prevent water from infiltrating the home, and some regulate temperature and airflow while controlling moisture.
For those of us living in Traverse City, where winter rolls off the lake in waves of wind, snow, and biting temperatures, having a properly constructed roof is extremely important. Every layer has a job to do, and even if one piece is missed, the home is left vulnerable to problems that can quickly spiral out of control. Even in regions with less challenging weather, a roof cannot perform as designed without each piece.
With that in mind, we’ve created this guide to walk homeowners through the major components of a roof. You’ll learn where each layer goes and what happens when one is overlooked. With this information, homeowners can better recognize quality work and avoid costly problems down the road. Here is a close look at the key components of an asphalt-shingle roof, why each one matters, and what can go wrong when one piece is missing.
Roof Decking (Sheathing)
The decking is commonly made from sheets of plywood or oriented strand board (OSB). Known as the foundation of the roof, these boards are secured directly to the rafters and trusses using nails. This is the first layer that must be installed before any other roofing materials can be installed. Because this is the first layer of the roof, the quality of its installation is critical for every layer that follows.
What Happens When It’s Overlooked?
While it is unlikely and nearly impossible to install a roof without decking, overlooking material quality and installation can create problems from the start. Weak, deteriorating material cannot hold roofing nails securely; it increases the risk of moisture penetration into the home and loose shingles, and it can lead to premature roof failure. Before a roof replacement, a professional roofing company will always inspect the decking and replace damaged sections before installing new roofing materials.
Drip Edge and Flashing
Flashing is a general term for the metal used to keep water from entering a structure, such as where a chimney protrudes. The drip edge is a type of flashing that is installed along the bottom eaves of a roof and also at the rakes (the sloped side edges). The purpose of flashing is to guide water runoff away from the exposed edges of the roof decking and into the gutter system.
What Happens When It’s Overlooked?
When a roofing installer misses drip edge installation, water can work its way behind the gutters, soaking the exposed roof edge and fascia boards. Missing or poorly sealed flashing is a leading cause of roof leaks. Without flashing, wood can rot, and the roofline can begin to deteriorate prematurely.
Underlayment
In between the shingles and the roof decking, you will find the underlayment. This specialized barrier helps protect the roof decking from moisture penetration. Usually made from synthetic materials, underlayment provides another layer of protection to keep moisture from reaching the roof’s foundation and causing damage.
What Happens When It’s Overlooked?
Without underlayment, your roof is exposed to every drop of water that falls on it. Even with shingles in place but no underlayment, one small gap can expose the wood underneath to moisture, increasing the risk of roof rot, leaks, and ultimately structural deterioration.
Ice and Water Shield
If there is one roofing component a professional roofing company in Traverse City should never miss, it’s the ice and water shield. This specialized membrane is usually added to the most vulnerable areas of a roof, such as along the eaves, in the valleys, and around roof penetrations like chimneys, vents, and skylights. Self-adhering, this membrane is designed to keep a watertight barrier, preventing moisture from entering the home when water backs up underneath the shingles. In cold-weather regions like Michigan, this membrane is not optional.
What Happens When It’s Overlooked?
When ice and water shields aren’t installed where they’re needed, water seeps under shingles and saturates everything below them. Without this important membrane, homeowners can experience interior leaks, damaged attic insulation, mold and mildew growth, rotting wood, and other extensive interior water damage.
Starter Strip
Most homeowners have probably never heard of starter shingles. However, shingle starter strips play a key role in how secure the roof is. Installed along the eaves before the rest of the shingles, starter strips provide the adhesion and sealing needed to prevent uplift at the roof edge.
What Happens When It’s Overlooked?
Without starter strips, the lower edge of the roofline is more vulnerable to wind damage. Wind-driven lifting and loosening of shingles also expose the roof to moisture issues when shingles don’t provide proper cover.
Shingles
Now for the most well-known component of a roof, the shingles. Shingles themselves are the primary protector against the weather. A professional roofing company will install asphalt shingles using correct nail patterns and paying careful attention to all manufacturer instructions. Available in a wide range of colors and styles, shingles contribute to the home’s aesthetics while providing key protection against the elements.
What Happens When It’s Overlooked?
While it would be difficult for a roofing company to get away with not installing shingles on a shingle roof, they could potentially overlook proper installation. Missing or damaged shingles, as well as incorrect nailing patterns, leave the underlying materials vulnerable to moisture, which can lead to leaks and rot in the roof deck.
Ventilation
A good roofing system does much more than keep water out. A well-functioning roof also manages the heat and moisture buildup within the home. During a roof installation or replacement, ridge vents, soffit vents, and related components that support the home’s airflow must be properly placed and functioning. Proper ventilation not only regulates indoor temperatures and reduces moisture inside the home, but it also extends the life of the shingles and underlying materials.
What Happens When It’s Overlooked?
A roof lacking proper ventilation creates year-round problems for homeowners. During winter, poor airflow can lead to condensation inside the home and contribute to ice dam formation. During warmer seasons, excess heat in the attic can make indoor temperatures uncomfortable and put undue stress on cooling systems.
Ridge Caps (Ridge Shingles)
Ridge caps are one of the last components to be installed during a roof installation. Acting as a protective covering where two slopes meet at the roof peak, ridge caps cover the otherwise exposed seams where wind and moisture can enter the system. Different from standard shingles, ridge caps are cut to fit the angles and contours of the roof.
What Happens When It’s Overlooked?
Without ridge caps, these areas remain exposed to weather, leading to water infiltration, wind damage, and a significantly reduced roof lifespan. Poor installation, whether due to incorrect nailing, missing sealant, or any other cause, will also lead to leaking, lifting of shingles, and an uneven appearance that stands out from the street.
Choosing the Right Roofing Company for a Complete Installation
We just learned how important each piece of a roofing system is to protecting the home and extending the roof’s lifespan. So how can you be sure you choose the right professional to partner with? Here are a few things to look for when looking for a true professional roofing company:
- Ask for an estimate that includes a breakdown of the roofing materials for the project. It should include the underlayment, ice and water shield, drip edges, flashing, starter shingles, ridge caps, and ventilation. Understanding the layers of a new roof helps homeowners know what to include in the material estimate.
- Ask each company you are considering how the existing roof decking will be evaluated and the steps they will take to replace it if needed.
- Ask for manufacturer details for the products the company will use. Verifying that the company follows or exceeds all manufacturer guidelines helps ensure the roof performs as it should and keeps the warranty intact.
- Make sure any company you hire is licensed and insured.
- Do your research. Ask for local references and examples of work, and check the company website for client testimonials.
Choosing a professional roofing company in Traverse City isn’t about finding someone to slap on some shingles. It is about finding a team of professionals who understand the entire roofing system, the importance of every layer, and how to get every detail right.
A Complete Roof Is Built One Layer at a Time
More than a covering over your head, your roof is a combination of pieces that work together to keep your home safe, dry, and comfortable. A complete roof does not happen by accident. It results from deliberately placed materials, each serving a specific purpose and working with the others to protect everything below the surface. From the roof decking that provides a solid foundation to the flashing that protects the vulnerable intersections, each layer is a vital component of the complete system. Taking the time to understand what goes into a new roof and choosing a qualified professional who prioritizes high-quality and proper installation helps ensure your investment delivers the long-term protection and longevity you expect.